4-in-1-Akku-Unkrautvernichter Pro

4 in 1 Cordless Weed Eater Pro

I started out using the saw blade to cut thick weeds. It didn't seem to be working very well, so I switched to the long 2-edged blade, and things worked great. It took me a while to figure out that the motor would stop if I squeezed the trigger and held it on. I needed to turn on the motor by pressing the trigger multiple times. Once the motor reached maximum speed, it would keep running until I released the trigger. Some of the weeds I was cutting were about 1/2 inch in diameter. It did a good job.

I love your tool, but the VERY limited pics and instructiions of how to assemble the complete unit with wheels etc is not at all complete enough for an average person. It took me many hours to complete. Do you have something online somewhere that provides this??? I now have both 3n1 and 4in1 tool which I use for different levels of brush and grass

Great product. Please the way the product works.

Pretty neat little tool with the bonus being that it's cordless. A little bit more power would be nice and the strips used for weed eating aren't good at all, they didn't last but minutes. I didn't get the stringer with mine unfortunately, I think that would have made it a much more useful tool. Over all I think it's a great idea but needs some improvements to be 5 star, a good 4 star though.

First of all download the video. Without that you will not get it together right.
There are 7 long screws and three short screws. Watch the video carefully to see which ones are used where.
The black shield goes on first. It uses two long screws. Next, the lower head protection cover is a round black thing with three holes in it. This is one thing that has to go on just right in order to be able to tighten the blade. There is hole that should face you and a little to the left as the unit is laying down as shown in the video. The screw driver that comes with the unit must go through that hole when tightening the blade. The nut that tightens the blade is LEFT THREADED. You need to know that when trying to tighten the blade. You MUST have that hole in the black disc slightly to the left but facing out or you cannot tighten the blade as you MUST have the screw driver in that hole to prevent the whole thing from turning. That and putting the handle on are the things they do not show well in the video. The Washers and the short screws go on the wheels. Make sure the handle is facing the right way. If you put the handle on wrong it cannot be set for different ways. The solid side goes to the far side as the unit is shown in the video. If it is not that way, the angle cannot be changed I have only used it for a short time, but it works very well on brush.

I really like it. I haven't used all of the attachments. It works great My husband used it and broke the small wheels off. He didn't know how it worked.

I love how this tool handles everything — trimming, edging, and even brush cutting!

For the price, you’re getting serious versatility. I’ve used all four functions and they work flawlessly.

No more dragging cords or dealing with gas! This tool is quiet, efficient, and the battery charges fast.