












Motosierra inalámbrica 2 en 1 de 8 pulgadas con sierra de pértiga
- Feature
- ✅ No cords, no fumes cutting, cuts 6" logs in 5S
- ✅ Reach 14ft high branches safely, no need ladder
- ✅ 4.8-8ft Extension Pole
- ✅ 7.3lbs Weight for Easy Cutting
- ✅ 2pcs 10-cell 1500mAh Batteries


Specification
Type: Telescoping Pruning Saw
Material: ABS Plastic
Voltage: 21V
Weight: 11 lbs (4.85 kg)
Power Source: Lithium-ion Battery
Battery Capacity: 2 × 1.5 Ah
Chainsaw: 3.7 lbs (1.67 kg)
Chainsaw + Telescopic Pole: 7.3 lbs (3.31 kg)
Minimum Length: 134 cm / 52.75 inches
Maximum Length: 213 cm / 83.85 inches
Why Choose iToolMax?
🚚 Envío rápido y gratuito
Envío gratis en todos los artículos a la mayoría de las ubicaciones a nivel nacional. Por lo general, tu paquete se entrega en 4-7 días hábiles, para que puedas relajarte sin preocupaciones.
🔙Prueba sin riesgo de 30 días
¡Pruébalo sin preocupaciones! Reembolso completo dentro de 30 días si no estás satisfecho.
🔄 Garantía de 1 año
Ofrecemos una garantía de un año a cada cliente que compra nuestros productos, ¡para que los uses con tranquilidad!
🤛 Soporte al cliente de por vida
Siempre estaremos aquí para ti. Si tienes alguna pregunta o inquietud, no dudes en contactarnos en support@itoolmax.com o por chat en línea.
♻️ Pago seguro y privacidad protegida
Todos los datos están encriptados. Tu información se mantendrá segura. ¡Proteger tu privacidad es importante para nosotros!
✅ Confiado por más de 200,000 clientes
Verificado por usuarios reales: compra con confianza y facilidad.

Make High & Low Cutting a Breeze!
Say goodbye to the heavy and cumbersome operation of traditional electric saws, iToolMax 2 in 1 chainsaw make you switch seamlessly between a pole saw for high, hard-to-reach branches and a chainsaw for ground-level cuts. No longer needing to carry ladders and climb ladders, especially suitable for gardeners with bad waist and back pain.

Up to 14FT Overhead Reach
iToolMax 2-in-1 chainsaw comes with a 4-section extension pole, the Telescoping pole extends from 4.8 ft to 8 ft, making it easy to access tall trees and hard-to-reach branches without a ladder, improving your safety and efficiency.

Ergonomic Design and Safety Protection
iToolMax 2-in-1 chainsaw weighs only 7.3 lbs pounds, and the ergonomic design greatly improves the grip comfort, reduces finger and wrist fatigue, allowing you to use it easily.

1200W Brushless Motor
Upgraded 1200W brushless motor, has a 300% longer life than other chainsaws with brushed motors, an 75% increase in output power, a 55% reduction in energy consumption, and a 200% increase in work efficiency, enjoy low-noise, high-efficiency cutting work.

180° Adjustable Angles
Not only expands the reach but also enhances maneuverability in tight or hard-to-reach spaces. Make it easy to achieve desired trimming effect even at higher place.
Additionally, the innovative dual-finger hook design enhances holding power for more secure operation.

Automatic Oiling, Less Hassle
Compared to other manually lubricated equipment, it boosts cutting efficiency by at least 20%. Continuous chain lubrication reduces wear and jamming, extending service life.

One Machine Multiple Uses
Not only can cut wood but also prune thick branches, trim small trees, and clearing overgrown areas, and tackling after storm cleanup, meeting a variety of needs, saving money and labor. Whether you're a homeowner, gardener, or landscaper, this tool makes every job quicker, safer, and more efficient.
FAQ
Does the chainsaw require oil?
Yes, the chainsaw needs bar and chain oil for lubrication. This reduces wear and helps the tool operate smoothly.
Avoid using motor oil or other substitutes, as they may damage the machine.
What should I check if my 2-in-1 cordless 8-inch chainsaw with pole saw isn’t working?
When connecting the pole, make sure it’s installed correctly. Each iToolMax extension pole has a “STOP” mark and must be fully plugged in to power on.
Connect only the head and tail poles and turn on the power:
✅ If it works: Check the two middle sections one by one. If a section fails, disassemble and inspect for loose wiring.
❌ If it doesn’t work: Disassemble each section and check for loose wires.
Please send photos of any loose parts. If wiring is not the issue, we’ll continue to assist you further.
How do I adjust the chainsaw chain tension?
The tension of the chain can be adjusted and it is not a malfunction. I will send you a video and you can try to adjust it after watching it.
How to adjust chain tightness link:
👉🏼 https://youtube.com/shorts/E98dT8Iq1cQ?feature=share
Please check for the following:
- Is the chain too loose or too tight?
- Is the guide bar/sprocket faulty or worn?
- Is the chain damaged or installed incorrectly (whether it is installed upside down or not fully engaged in the guide bar track)?
- Is the chain operating improperly or overloaded (cutting thick or hard wood, running at high speed for extended periods, or experiencing excessive centrifugal force on the chain)?

